Features:
T delay time (the maximum delay time is 60s, the minimum time is set, the delay time is 20s, the experience value is set to 30-40s).
Specifications:
Solar panels: polycrystalline silicon solar panels
Connecting Cable length: approx. 5m/16.4ft
Power supply: 1 x 3.7V 18650 battery 1200MAH(Not included)
Light source: 22 bright LED 13000MCD
Material: ABS plastic
Charge time: 8 hours
Power: 5W
Waterproof grade: IP55
Sensing distance: 2-5m/6.56-16.4ft
Induction range: 120 degrees
Optically controlled induction starting: 5LUM - 20LUM adjustable
Installation height: 1-3m/3.3ft-9.84ft
Delay lighting time: 20-60 seconds adjustable
Operation Manual:
1. Connect to the solar panel, and then put the solar panel is installed in the place where the solar energy can be illuminated, and then the toggle switch on the lamp body is placed in the \NO\ file.
2. The lights will trigger the lights during the day by charging into the night. When the sensor area with people passes, the light triggers the light.
3. Delay setting time (default is 30-40s), if the sensor area without people moves, the lights will go off, sufficient electrical induction about 280-300 times.
Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 x Double Head Light
1 x Solar Panel
T delay time (the maximum delay time is 60s, the minimum time is set, the delay time is 20s, the experience value is set to 30-40s).
Specifications:
Solar panels: polycrystalline silicon solar panels
Connecting Cable length: approx. 5m/16.4ft
Power supply: 1 x 3.7V 18650 battery 1200MAH(Not included)
Light source: 22 bright LED 13000MCD
Material: ABS plastic
Charge time: 8 hours
Power: 5W
Waterproof grade: IP55
Sensing distance: 2-5m/6.56-16.4ft
Induction range: 120 degrees
Optically controlled induction starting: 5LUM - 20LUM adjustable
Installation height: 1-3m/3.3ft-9.84ft
Delay lighting time: 20-60 seconds adjustable
Operation Manual:
1. Connect to the solar panel, and then put the solar panel is installed in the place where the solar energy can be illuminated, and then the toggle switch on the lamp body is placed in the \NO\ file.
2. The lights will trigger the lights during the day by charging into the night. When the sensor area with people passes, the light triggers the light.
3. Delay setting time (default is 30-40s), if the sensor area without people moves, the lights will go off, sufficient electrical induction about 280-300 times.
Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 x Double Head Light
1 x Solar Panel
